UMH HEXAGON
Premium filter with energization
Spring water quality
After filtering, the water is energized, hexagonally structured and made optimally available to cells with the newly developed UMH device, which contains 10 different handmade glass vials as a highly stable energy field. When selecting the cartridges, consideration was also given to any UV treated water.
Watch our UMH Hexagon ProduCt-Video:
5 years warranty
On function and equipment technology
5 months money back guarantee
if the mode of action is not satisfactory
Areas of application
Faucet kitchen, office, practice / Also available as a countertop filter with faucet / Protect from frost. Use only with cold water.
Technical data
Length in mm: | 280 |
Width in mm: | 180 |
Height in mm: | 300 |
Flow rate liters/min: | 4-6 Liter |
Weight in kg: | 6 |
Advantages
Removal of pollutants / minerals are retained |
Purifies the water with activated carbon block |
Deletion of the pollutant frequencies |
Improvement of the cellular water absorption capacity |
Improvement of the cellular nutrient uptake capacity |
Crystalline spring water structure |
Stable bioenergies |
Noticeably soft and fresh taste |
Without electricity, without chemistry, without magnets |
Environmentally friendly & resource saving |
Hexagon activated carbon block filter
DESCRIPTION
The Filwatec activated carbon block is a sintered activated carbon filter for drinking water filtration. With a pore size of about 0.6 μm as well as a 55% increased activated carbon mass compared to the NFP Premium cartridge and thus higher absorption capacity, dissolved pollutants as well as particles and microorganisms can be removed from the water even more safely.
PERFORMANCE PARAMETERS
Item number:
Flow:
Filter unit:
Dimensions:
Filter performance:
GFP-D
2-3 liters / min (at 4 bar, after 5 minutes run-in time)
0.6 µm
D = 76 mm, L = 246.5 mm (incl. flat gasket)
10,000 liters
DURATION OF USE
According to DIN 1988, the filter cartridge should be replaced after six months. As a rule, the filter is changed 1x per year. However, an earlier change may be necessary if the water flow is noticeably reduced.
POLLUTANT RETENTION
Pollutants dissolved in water, odors and tastes are permanently removed by adsorption. The pore size of 0.6 μm safely retains particles, bacteria and much more. The adsorptive retention rate (ARR) is 120% and the retention capacity (ARK) is 130% compared to Carbonit’s NFP Premium cartridge. Therefore, the independent expert opinions issued for the NFP Premium cartridge apply without restriction to the GFP Premium cartridge.
The following parameters have been demonstrated for NFP Premium:
Lead1, Copper1 | TÜV | > 90 %* |
Bacteria2, microorganisms, fungi/yeasts | GFT / Bielefeld University | > 90 %* |
Chlorine1, Chloroform1, Lindane1, DDT1, Atrazine1 | tti Magdeburg GmbH / HS Magdeburg | > 90 %* |
Drug residues1, Polar pesticides1 | Berlin University of Technology | > 90 %* |
1.) Test with load over service life of 6 months
2.) Test with load over filter capacity of 10,000 liters.
* ) The exact retention values and test conditions can be seen in the expert reports,
which you can download at www.carbonit.com.
The expert opinions on performance and hygiene were confirmed by TÜV Berlin-Brandenburg. In addition, CARBONIT NFP Premium received the LGA certificate for tested safety according to German food law.
Filwatec activated carbon block premium cartridges are manufactured in an environmentally friendly way from mainly renewable raw materials by Carbonit for Filwatec. (
www.filwatec.de
)
Learn more about our
UMH Filters & Osmosis
Reliable information about UMH technology can be obtained from the following dealers or their homepages. We deliberately enter into partnerships with companies that sell our products in Europe in accordance with ethical principles and are local contacts for our customers.
Here you can download
the product data sheet.
The assembly instructions
can be found here: